Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
auto flame boiler controls

Josh_10
Member Posts: 786
Buzz,
I used to work for the Autoflame rep. Autoflame has training in London where you actually get your hands on the product and tune a burner. As far as I know it is open to anyone. I would go through their website.
Also about once a year they offer classroom training for their reps and you should be able to get into the class if you pester the rep enough.
I used to work for the Autoflame rep. Autoflame has training in London where you actually get your hands on the product and tune a burner. As far as I know it is open to anyone. I would go through their website.
Also about once a year they offer classroom training for their reps and you should be able to get into the class if you pester the rep enough.
0
Comments
-
auto flame boiler controls
Has any one had any luck getting parts or training on auto flame control . In maine one company controls them and they are no help.0
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 966 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements