Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Ray BOILER
Pete Caruso_2
Member Posts: 3
At 20 GPM, rAy's pressure drop would be about 2 feet.
Pete Caruso, rAy Sales Manager, pcaruso@mestek.com
Pete Caruso, rAy Sales Manager, pcaruso@mestek.com
0
Comments
-
Ray BOILER
Does anyone know what the pressure drop threw the Ray boiler is? Need it for indirect calculation.Can the right side of the boiler be mounted close to the wall?0 -
Almost
nothing,same as any conventional CI boiler.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"To learn more about this professional, click here to visit their ad in Find A Contractor.0 -
The manuals can be downloaded from Ray's website. www.knowsomethingmore.com
the clearances you seek should be in the install manual..
TimJust a guy running some pipes.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements