Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Old to new........Fuel oil to gas...................(hb)

heatboy_7
heatboy_7 Member Posts: 2
in THE MAIN WALL
This old tankless boiler sat right behind the living room and kitchen and they could hear everytime it started. He came into the room and asked when I was going to start the Vitodens. I told him it was running at high fire to recover the indirect. His words "The silence is deafening!".

Fire away.

hb

Comments

  • Dobber
    Dobber Member Posts: 91
    Beauty Job

    Very nice hb. I miss seeing that diamond plate.

    Dobber

    There was an error rendering this rich post.

  • heatboy_9
    heatboy_9 Member Posts: 9
    Thanks.............

    .........Brian. The diamond plate jobs have been a little rare these days!

    hb
  • Andy Stack_3
    Andy Stack_3 Member Posts: 39
    Nothing but quality,

    I think you should bring some of that diamond plate to Cleveland, Great looking job!!!!
  • Chas_7
    Chas_7 Member Posts: 2
    Cables

    Can I ask what cable you are wiring the pumps with?
  • heatboy_8
    heatboy_8 Member Posts: 7
    Sure.

    The pump wiring is 16-3 SJOOW cable.
  • Jed_2
    Jed_2 Member Posts: 781
    I notice

    AL294C venting. Choice or revised Vitodens venting requirement? Haven't they been vented with PVC as a rule?
  • [Deleted User]
    [Deleted User] Posts: 0
    Nice install

    Nice and neat. I like the use of the hydrolink. What type of emmitters does this house have? What made you use all of the Taco 007's? I have never seen a Viessmann vented like that before, Is that approved?
  • heatboy_8
    heatboy_8 Member Posts: 7
    The 007s were..........

    .....already there and worked. I pumped in Rhomar 9100 and let is circulate for a few days to make sure things were clean.

    Yes, the stainless steel venting (Z-Flex)is approved by Viessmann. They do not, however, approve PVC for their vent. IPEX CPVC has been OKed by them. I generally use the coaxial vent, but I only had a little room to core the wall.
  • ScottMP
    ScottMP Member Posts: 5,883
    showing why you are the king

    Sweet work dude, I agree, the diamond plate has been missing.

    So your taking make up air form the room and thats O.K. with Viessmann ? Who cored the hole ?

    Nice work as always. See now one my jobs they tell me I am using too many pumps. I think it looks great and I really like the heatlink.

    Scott




    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • heatboy_9
    heatboy_9 Member Posts: 9
    I used the pumps.....

    ....that were already there, Scott. I would have chosen zone valves if it was new or the pumps were junk.

    Plenty of air availble for the boiler,so I don't see any issue there.

    I have a guy who works for G&S Fasteners who just drills holes through concrete/stone.
This discussion has been closed.

Categories