Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
To Fill or Not to Fill

irv_3
Member Posts: 7
Guys,
I am starting my steam system for the season. Everything is working well, however the sight glass on the LWCO is showing signs of rusty water. I didnt expect it to be clear.
I read from past posts that changing a lot of water would accelerate the life of the boiler. Whats the best way to get the water back to a clearer condition?
Thanks,
Irv
I am starting my steam system for the season. Everything is working well, however the sight glass on the LWCO is showing signs of rusty water. I didnt expect it to be clear.
I read from past posts that changing a lot of water would accelerate the life of the boiler. Whats the best way to get the water back to a clearer condition?
Thanks,
Irv
0
Comments
-
There is a small drain valve on the bottom of the lower sight glass holder. Open it and see if the rusty water drains out and clears up before draining or skimming.
TimJust a guy running some pipes.0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 973 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements