Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Measuring an existing radiator
Big Ed_4
Member Posts: 3,004
From the floor to the top of the section. Are you using Dan's book EDR ?
There was an error rendering this rich post.
0
Comments
-
Measuring an existing radiator
When measuring existing radiators to size a replacement boiler, do you measure the radiators height from the floor to the top of the section or from the bottom of the section to the top of the section?0 -
Radiator Sizing
Chris here is a link to a site that can help with the radiator sizing if needed.
http://www.crownboiler.com/educate/sizeheat.asp0 -
Measuring an existing radiator
Big Ed, Thank you for the response I really appreicate it. I do not have Dans' book on EDR, all I have is 'Lost Art' and it's 'Companion'.
Mike, Thank you for the web site link it is and is going to be very helpful.
Thanks again to you both! I am filling in on a project for some one in our office and this is not my forte. I will be able to give him a good head start.
c.golland0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements