Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
add on wood boiler radiant heat
Mike Thomas_2
Member Posts: 109
Just use a standard primary secondary as outlined in Dan's books. The control will be tricky. I have done it using Tekmar controls, lead / lag type setup.
0
Comments
-
radiant wood boilers
I'm getting ready to install a logwood add on boiler next to a weil McClain cgi lp boiler. There are 3 radiant zones and I need a little help with the piping. I wiil be using circs. Could anybody get me a piping schematic? It would be greatly appreciated.0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements