Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Radiant Heat Project (finished)
Jamie Pompetti_2
Member Posts: 62
This was a little project we finished last winter. The boiler was a new cast-iron oil fired boiler(we did not install it).
We did however re-pipe the system & added radiant heat!
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=289&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
We did however re-pipe the system & added radiant heat!
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=289&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Neat and simple, Jamie!
Nice enhancement of what might have been an ordinary garden-variety heating system.
The Caleffi separator, is that circulator out of the return port going directly to the boiler? Curious what you did to maintain the CI boiler above dew-point. Is there a Danfoss valve there or other means?
Always good to see that shade of Pompetti Red!0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements