Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Did you know.........
Howard Emerson
Member Posts: 111
..........you can thread a piece of .080 weed whacker line through an American Standard kitchen faucet to dislodge rubber bits from a corroded shutoff washer?
Just take off the cartridge and shove it through the small hole!
Don't ask me how I know, but I was on hold with American Standard for about 5 minutes when the light turned on........
It's probably not news to any of you guys, but I'm certain that Murphy was a plumber.
:-)
HE
Just take off the cartridge and shove it through the small hole!
Don't ask me how I know, but I was on hold with American Standard for about 5 minutes when the light turned on........
It's probably not news to any of you guys, but I'm certain that Murphy was a plumber.
:-)
HE
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements