Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

looking for TRV head

Brad White_194
Brad White_194 Member Posts: 74
in THE MAIN WALL
Oventrop tends to have a finer thread pitch than say Braukmann. Different diameters too. I have found that Oventrop heads can fit on Tour and Andersson valves at least one time.

Cannot hurt to check the spares box.

Keep in mind that once you have a "fit", the stroke length comes into play so accuracy may suffer.

Comments

  • Timco
    Timco Member Posts: 3,040


    I am looking for a TRV head for a Herz-Armaturen small panel rad. PN is 1 7260 99. I emailed the factory and got no response. Will any head fit?

    Tim
    Just a guy running some pipes.
  • Unknown
    Unknown
    Maybe

    you can find something here Tim.

    Dave
  • Brad White_200
    Brad White_200 Member Posts: 148
    A much better

    idea, Dave... much better. Wish I thought of that, adapters from Macon/Tunstall. Cool.
This discussion has been closed.

Categories