Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Rating for Trane unit heaters
The Boiler Dr.
Member Posts: 163
unit heaters and wall hung radiation.
Does any one have any information on Trane 1.25" copper radiation with 4.5" aluminum fin installed in 18" high sloped top cabinet.
Also seeking output information for old Trane unit heaters Models 60H, 80H and P100 using 180*F entering water.
Does any one have any information on Trane 1.25" copper radiation with 4.5" aluminum fin installed in 18" high sloped top cabinet.
Also seeking output information for old Trane unit heaters Models 60H, 80H and P100 using 180*F entering water.
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 102 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 935 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements