Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
New / replacement A.C./heat pump equipment recommendations

klaus
Member Posts: 183
I've seen virtually no difference. We're mostly commercial so we haven't installed a lot of these but to this point I've noticed no reasonable difference. My own personal w-w GSHP is a 410A system. It's performed flawlessly (two yrs old).
0
Comments
-
Just a little survey
I get a lot of questions from people about replacement and new installations since I used to be in the business full time regarding R-22 vs. R-410 systems, mid-range vs. high SEER equipment, etc. How is the R-410 equipment holding up so far? No need to mention brands...I just want to steer people in the right direction.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 102 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 935 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements