Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Iron Steam Pipe Leak

Norm Harvey
Member Posts: 684
Nothing short of a proper repair will do in my eyes, but if your looking for a temporary fix, I use rubber gasket material held in place by a hose clamp large enough for the pipe or fitting.
There was an error rendering this rich post.
0
Comments
-
Iron Steam Pipe Leak
Is there any product to repair 1-1/4" steam pipe return leaks in place? I have a leak at a t-fitting and at a coupling/union and I don't want to rip up the floor and wall if I don't have to.
Thanks.0 -
epoxy
try epoxy . the union ....tighten w/ two wrenches0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 102 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 935 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements