Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Monitor Water usage - Steam Boiler
JackR
Member Posts: 125
Change your autofeed to a Hydrolevel VXT, it has a digital feeder counter built-in, otherwise you can purchase a standard water meter and put it in-line. I found for the price of the VXT it is more cost effective to change the feeder than to add a meter.
Dan
Dan
0
Comments
-
Does any know of a water gauge (digital or analog) that I can put inline to my Steam Boiler to see how much water is being added to the boiler? I have an auto water feed without a gauge on it.0 -
Water Meter
Unfortunately the plumber installed an auto feeder without a digital meter I already paid for it, but didnt realize that it didnt have a meter (so now i'm stuck with what i have) so I was hoping that there was a easy addition I could put inline on the feed side.0 -
You can
add a standard water meter in line with the feeder but it may end up costing you more than a new feeder with a counter would.0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements