Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Large bore pex
Options
Steve Ebels_3
Member Posts: 1,291
I have been using Rehau exclusively for the past few years because the supplier rented out the hydraulic tool set along with the tubing for a very reasonable price. The Rehau tube itself is outstanding as is the Everloc fitting system. Now however it seems that they are no longer going to sell Rehau so I'm checking to see what the rest of you guys use for 1-1/4" to 2" pex. What brand do you like and what tools are needed to assemble the fittings?
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements