Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Geothermal radiant with backup oil
A.J.
Member Posts: 257
Well I finally have my first georadiant job scheduled to go in a couple of months. I'm very excited about it, we have a buffer tank controlled by a Watts Hydronex panel to optomize the effeicency of the geo equipment. We also have a backup boiler going in to. I'm alittle unsure of were to tie it in , thinking of just putting two closely spaced tees inbetween the Hydronex panel and the pirmary pump to tie in the boiler and I was woundering if that was the right spot?
0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 975 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements