Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Zurn Pex Question
Greg_27
Member Posts: 23
I'm currently having fin-tube base board installed into my 2-family. The contractor piped these in using Zurn Pex through the floor. Some of these go through holes drilled into the floor directly over crawl space area.
My question is, can I spray in "great stuff" foam insullation into the hole to seal it up? I just want to know if there is potential for chemical breakdown of the PEX. I sent an email to "Bill" who's commented here regarding Zurn PEX but havn't received a response.
I've read some colorful comments regarding PEX on this site over the last couple days (some making me nervous). So far so good with my new system...although there isn't any water in it yet!
Cheers,
-Greg
My question is, can I spray in "great stuff" foam insullation into the hole to seal it up? I just want to know if there is potential for chemical breakdown of the PEX. I sent an email to "Bill" who's commented here regarding Zurn PEX but havn't received a response.
I've read some colorful comments regarding PEX on this site over the last couple days (some making me nervous). So far so good with my new system...although there isn't any water in it yet!
Cheers,
-Greg
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 102 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 935 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements