Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

ridgid threader 65R-C Is antone familiar with this and does it

Jim Bennett
Jim Bennett Member Posts: 607
in THE MAIN WALL
be able to use it with a 300 power head. I have used a 65-R with our model 270 power tri-stand.

Jim

There was an error rendering this rich post.

Comments

  • jim_160
    jim_160 Member Posts: 24


    Anyone familiar with a ridgid 65 R -C threader? will it work well with a 300 power head? I'm looking to buy these as a pkg deal
  • bob young
    bob young Member Posts: 2,177
    65-R

    threads from 1" to 2 " with one set of dies. jam-proof cuts crooked threads if you wish. made for the 300. a superior tool. will last a lifetime unless you lose it or some one steals it.
  • Darin Cook_5
    Darin Cook_5 Member Posts: 298
    The 65R is a great tool

    Years ago we FOUND one in immaculate shape at the scrap yard with a tri-stand that someone had thrown out! I can only imagine that someone was cleaning out a basement of someone who had passed away. The 65R has been my go to threader since we found it. I have not used the Ridgid 700 because it likes to rip the threads off the cheap steel pipe while the 65R makes clean, perfect threads. What a great tool!





    Darin

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories