Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
fault on viessmann boiler
Options
Tom Eigo
Member Posts: 8
I'm having a problem with one of our boilers. We have two Vitodens 200 modulating. The boiler #2 which is dedicated to the domestic hot water(indirect Super Stor) doesn't seem to be working. We have a service tech here now, but without luck. The cascade board(module) is blinking for boiler #2. And the fault states ouside sensor. We can't seem to get it bypassed in order to get the DHW going. On boiler #2 I noticed there's no setting for temperature and was wondering if this could be the cause. Any suggestions would help. Lake George NY
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 50 Biomass
- 418 Carbon Monoxide Awareness
- 75 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 93 Geothermal
- 150 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 854 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 87 Job Opportunities
- 15 Recall Announcements