Need a steam pro - Boston Area

ed wallace

steve check your mail

Steve Garson_2

Need a steam pro - Boston Area

The pros listed under "Find a Pro" for my area focus on radiant and hydronic. Can anyone suggest a pro to hire? I used Ed Wallace in the past, but he's MIA.

This is what I need:
1. Installation of adequate venting on a 350K BTU/Hr steamer that has no main vents at all. May need four Gorton 2s.
2. Replacement of the pressure relief valve which today leaks a gentle stream of steam.
3. Fix leak on a big steam valve that drips slightly.
4. Evaluate the boiler feed pump setup which seems to fill the boiler to around 2-inches above the proper fill line.

The boiler is an AO Smith that is around 15 years old.

Thanks for any referrals.

Dan C._4

Where are you located?

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Steve Garson_2

Newton, MA. 1 mile from I-95

Dan C._4

I service Newton

Give me a call if Ed does not want to do it.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Steve Garson_2

How can I reach you?