Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Tarm Wood Gasification with VSIM and Heat Storage tank

Kevin O. Pulver
Kevin O. Pulver Member Posts: 380
in THE MAIN WALL
I posted earlier and got a positive response about using Variable speed injection mixing rather than the factory Termovar 3 way mixing valve. The time is nearing to install the boiler. Now I'm looking at the factory piping diagram (with termovar) and am having a hard time envisioning how to set up my own piping. (Tarm SP60, 960 gallon storage tank, 3 zones infloor, 1 zone baseboard and provision for future backup boiler)
I will have a Wirsbo 2 temp control at my disposal.
Does HR or one of the other Gurus-of-BTUs have any piping schematics please? I've searched the archives and the web, but am at a loss. Maybe I'm making it more complex than it needs to be, but the tank is confusing me. Thanks in advance, Kevin

Comments

  • ALH_4
    ALH_4 Member Posts: 1,790
    Schematic

    Any chance for a scan/photo of their recommended piping schematic?
  • jim post
    jim post Member Posts: 58
    Wood boiler piping diagram

    For all things wood boiler go here...
  • jim post
    jim post Member Posts: 58
    Wood boiler piping diagram

    For all things wood boiler go here...

    http://www.hearth.com/econtent/index.php/forums/viewthread/13877/
  • Kevin O. Pulver
    Kevin O. Pulver Member Posts: 380
    Sorry Andrew

    The Tarm site has nothing with buffer. The one they sent me is legal size paper and won't fit my scanner. My wife wasn't around to help me figure out a solution? (Honestly!)
    Kevin
  • Kevin O. Pulver
    Kevin O. Pulver Member Posts: 380
    Thanks JpinWI

    I think that's EXACTLY what I was looking for- for starters. I don't know why it seemed to complicated in my head. I can adapt that to VSIM very easily I think. Kevin
This discussion has been closed.

Categories