Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
PVI DHW
seabee570
Member Posts: 89
awhile ago we had 15-20 units installed,they were using low pressure steam as heating medium.We had some trap issues,and solenoid and venting issues,not sure if these things were heater related.They seemed to work pretty good once the bugs were worked out.We also had an issue with small control fuse blowing,they were located in very hot locations.overall not too bad
0
Comments
-
PVI
Anyone ever install or work on a PVI, any experience here?
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements