Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

PEX Mats

CDN Infloor
CDN Infloor Member Posts: 2
in THE MAIN WALL
Does anyone know where I can get pre-fabricated PEX Mats 10' x 125' ?

Al Crawford

Comments

  • Unknown
    Unknown
    Just looking at this...

    Brought to my attention by an architect, don't know any more about them than what's on the page. Sounds like a good product however.

    http://www.radiantcooling.org/faq.htm
  • CDN Infloor
    CDN Infloor Member Posts: 2
    Does anyone else..

    have any experisnce with these systems. Like MPF, we heard about this from an engineer.

    Al Crawford
  • tim smith
    tim smith Member Posts: 2,807
    Here is a link to the site, case studies etc

    http://www.bekausa.com/
    I don't know much about them but an interesting read.
  • Geoff McDonell
    Geoff McDonell Member Posts: 3
    Stadler Viega

    Try Viega radiant systems.
    http://www.viega-na.com/
    They have been making pre-strung PEX tubing mats for large slab applications in the sizes you seek. The Beka and Natural Cooling (Karo) products are polypropylene capillary tube mat systems and are completely different animals than PEX. Polypropylene is NOT an oxygen barrier material and some care and attention has to be taken when engineering the hydronics system to decouple the non-oxygen barrier capillary tube system from the ferrous hydronic components.

    Check out the Aquatherm polypropylene hydronic piping system too- now rated for North American codes and applications. It's in my toolbox of good stuff. http://www.aquatherm.ca/download.html
This discussion has been closed.

Categories