Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Plateless stapleup insulation ideas (The Youngster)

Josh_10
Josh_10 Member Posts: 787
in THE MAIN WALL
We refuse to install plateless staple up but one of our GC's has one that wasn't insulated. The space below is conditioned but the room is overheating. No problems with upper rooms.

Does anyone have any bright ideas for insulating above the sheetrock? Really only needs to be minimal. Maybe an R value of 5 or better.

Comments

  • Mark Hunt_5
    Mark Hunt_5 Member Posts: 53
    How about


    blown in cellulose?

    Minimal patching and painting.

    Mark H
  • Josh_10
    Josh_10 Member Posts: 787


    Thought about that but how do you protect the proper air gap?
  • Mark Hunt_5
    Mark Hunt_5 Member Posts: 53
    Well


    they could loose blow it and just put a few inches on top of the sheet rock. The cellulose would not have to come near the tubing really.

    Mark H
This discussion has been closed.

Categories