Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
EDR rating please
Options

markZ
Member Posts: 17
kpc and JohnNY, thanks for the replies. I'll use the 2sqft for my calculations. This bad boy has 20 sections making Rad then 40sqft EDR total. I know she cranks out the heat, but now I've got a number to back it up. Working on balancing an augmented 1 pipe steam system. Again, thanks for the number.
Mark Z
Mark Z
0
Comments
-
EDR rating please.
Steam buddies, looking for an EDR rating per section for the following: "Trim-line Rad, 25" tall, ~4.5" deep w/ 4 tubes per section. Not sure if all tube Rads are equal from the Colonial Heating web site.
Thanks, mark0 -
Sounds like 2 sq. ft. per section to me.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes0 -
I concur...
kpc0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 112 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 106 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 980 Plumbing
- 6.3K Radiant Heating
- 388 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements