Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Self Seal tubing adhesive stickers won't come off
Options
D107
Member Posts: 1,944
Well I'm in the middle of putting up the insulation and many of the self-seal tubes won't seal since the protective strips will not come off without removing the adhesive with it. Maybe the lot is defective but I'm not sure I can leave the insulation up there with those thin plastic strips possibly melting when the heat is turned back on.
Any ideas?
David
Any ideas?
David
0
Comments
-
Buy some white HVAC tape and use that to seal the line and around the outer edges. You'll be good. The white strip won't be touching the pipe so you'll be fine.0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements