Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
A late winter project
Options
Gene_2
Member Posts: 59
My bro-in-law provided me with some pics of the Buderus install I did for them. I almost forgot I had them. I do not have any before pics, but it was a one piece steel boiler with a domestic coil. It was firing at 145,000 input btu's. One giant old monster. I put in a Buderus G115/21 with an LT 160 indirect. I really like the Oventrop oil filter. The see-thru bowl is great for identifying any contamination issues and the shut-off is built into the valve. I used the available mounting bracket and a stainless braided whip for the oil line. Oil service will a snap. The surrounding piping was a real mess so we made it look more presentable. It will be interesting to compare oil consumption next winter.
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements