Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
oil leaks on new ful-flo oil filters

service
Member Posts: 3
we have heard and have started finding gaskets not fitting well in new ful-flo oil filters. we had one that poped out of the grove and leaked some oil. i do not know if the problem is a sizing on the bowl or a cast-iron head not machined properly. the gasket starts to look concave and does not look flat. has any one seen this or had a oil leak
0
Comments
-
Did the gasket have .....................
red or blue markings on it? This happened afew years ago when the wrong color was shipped by mistake.If I remember correctly you should have the red one on the B4.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 939 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements