Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Snow & Ice Sensor Still Has Snow?
MechTech_2
Member Posts: 84
I drove by one of my snow melt jobs today, and I'm sure that they are the envy of the neighbourhood, as the driveway was perfectly clear and dry, and we had about 8" of snow the day before. I had to back up becauce I noticed that the Uponor/Wirsbo Snow Pro 411 snow/ice sensor had about 2" of snow on it (the sensor is flush with the driveway surface)! I thought the surface of the sensor was warm enough between CWCO & WWSD to melt the snow? Any ideas?
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements