Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
AAAAAAAAA!!!!!!!!! cracked burnham!
JohnNY
Member Posts: 3,291
<I>...and aside from that, for my radiant staple-up job, i have an '83 cast iron burnham in my basement. i bought it used 10yrs ago, along with a tjernlund power venter and a honeywell aquastat, from a local hvac installer for $350...</I>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=290&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=290&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes
0
Comments
-
my 25yr old burnham
that was a scream in case you didn't hear it
why the scream you ask?
i read every word of every post of the previous 10yr cracked burnham post, and when i got to mary's centerfolds, they wouldn't show due to some explorer issue.
and ladies and gents, i'll leave the metaphoric magic to your imaginations as to how that felt.
why did i read it all you ask?
one of our, doesn't-like-to-get-dirty techs came in at the end of the day looking oil-burning boiler dirty.
"burnhams are junk!"
"why, what's up?", i asked in a most sincere tone, while chuckling inside at seeing one of the 'kids' get dirty.
"a cracked section. and it's in the end that's against the wall and piping, so i had to take the whole 'darn' thing apart. and i had to torch the press nips out!"
and self-censoring any further questions, because the youngster gets figgity when i do that, i'll keep you all posted with the details when i find out.
and aside from that, for my radiant staple-up job, i have an '83 cast iron burnham in my basement. i bought it used 10yrs ago, along with a tjernlund power venter and a honeywell aquastat, from a local hvac installer for $350. he yanked it from his customer, and replaced it with a scorched-air furnace. and while i don't use it full time, because i happen to like my scorched-butt, fireplace/ furnace, it's still in operation and doing fine0 -
serious post
absolutely. what made you think it wasn't?
and i also have an old heil hp that i got for free. and.....it was almost completely rebuilt before i got it. and my a/h is a 2.5ton, commercial, 1st co that i bought for $100, brand new0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements