Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Two pipe air vent system
Brad White_184
Member Posts: 135
fine trades-folks, but if you are on or near the North Shore, Milne P&H in Manchester by the Sea are excellent. Do yourself a favor and search under the Find a Professional tab under Resources tab....type in your zip code and let us know how it works out.
0
Comments
-
Burnham installation
In a three story 1898 Victorian with a two pipe air-vent system. Thought the water hammer was normal. After reading the WALL and "We Got Steam Heat",I have many concerns and questions
Looking at "The Lost Art of Steam Heating" I realize I have BIG problems. My boiler is set up like the one on page 62 the top drawing, "the way they used to pipe steam boilers in the old days"
I don't want to lose my boiler.
The Burnham In8 was installed 1997. From the Wall, I learned no header and no Hartford loop installed as instructed in the manuel.
Who can I get in the Boston area to help me? I'm About 10 milesnorth of Boston MA0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements