outdoor reset control

Brent_2

Hi
I am looking for an inexpensive outdoor reset control. This is for a single radiant zone addition in a existing hot water baseboard home. I was planning on using a 3 way mixing valve.

thanks
Brent

John_Barba

Taco iValve

Brent --

You might like this one. The iValve is a motorized 3(or 2, or 4) way mixing valve with a full outdoor reset control built in. Take a look, and feel free to e-mail me if you have any questions. Good luck...

JMB

http://www.taco-hvac.com/en/products/iSeries Mixing Valves/products.html?current_category=188

Brad White_184

Beat me to it, JB

Taco i-Valve.

Done.

Ted_9

3 ways

I use the Taco ISeries.

Weezbo

That

would likely be a great place for a 4 way I series R from Taco *~/:)

Brad White_184

Weezbo raises an excellent point

The 4-way will afford at least some boiler return water protection whereas the 3-way may allow extended periods of cooler return water. The system description does say "existing baseboard system", so the presumption of a non-condensing boiler exists as a strong possibility.

A condensing boiler favors a 3-way valve to avoid sending excess hot water supply back to the boiler. The 4-way will.

Good call, Weez!

GW

zone valve

do any of these Tacos look at indoor temp?

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Brad White_184

Not directly, no.

The i-Valve Reset series looks at ODT and HWS temperatures to set the curve. Optionally, boiler return is used as a low-limit protection function which over-rides the HWS setpoint, I believe.

Indoor temperature is governed by the space thermostat, ideally via a Taco Expandable Relay.