Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
valves
Dave Faust_2
Member Posts: 6
Why refer to the closing diriction of a valve? Why not just hot or cold to refer to valve stems? (This is what happens when you are raised on scorched air!)
0
Comments
-
0 -
faucet primer
Most domestic hot water valves / stems open counter clockwise and close clockwise. Domestic cold water valves / stems open counter clockwise when there is a round or cross handle; a lever ( or wing) handle should open clockwise..........0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements