Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Herman Nelson Immured Wall type radiator
Jon_17
Member Posts: 1
Does anyone have drawings/specs showing where the valves and traps are located in the basement area for the invisible "Immured" Herman Nelson residential wall radiators?
0
Comments
-
Somewhere
between the risers and the mains. It's really the installer's discretion. I think the bottom grille could be removed on these units though; check in there for the valves and traps if you haven't already.
If you find there aren't any traps or other devices on the return connections at all, it's an Orifice system.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements