Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Need Information Plese

Al Corelli_2
Al Corelli_2 Member Posts: 395
in THE MAIN WALL
Hi Guys,

I had to split a Burnham V88 to get it in the basement. We put it back together. I need to know how tight to leave the draw rods.

We often do (1 or two a week lately) the 4 thru 6 section V8s, but, thanks to our Escalera, we have not had to split them.

What is the required torque to leave on the draw rods?

We are used to assembling Smiths and using torque wrenches for assembly.

Thanks guys,

Al

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=449&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

There was an error rendering this rich post.

This discussion has been closed.

Categories