Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

FITTINGS

bob young
bob young Member Posts: 2,177
Steam system , Ken , ,megaloc & rectorseal #5 man. nipples & cut pieces ran up one inch per thread. no teflon , no wick. normal torque with proper wrenches.

Comments

  • bob young
    bob young Member Posts: 2,177
    FITTINGS

    Anyone notice black mal. fittings are getting even worse . DID NOT THINK IT POSSIBLE. with normal torque thread on 2 1/2 " to 4 " is running up a full one inch . most of the time. even ward. where is stanley flagg when ya need him ? the chinese set pipefitting back about a million years.
  • Keith_8
    Keith_8 Member Posts: 399
    stretching

    We thought the treads were being cut too deep. No, the fittings stink. More issues with them than I care to go into again. It costs $ to do it twice.

    You would think that by now the demand for quality fittings would dictate that the suppply houses stock them. But that hasn't been our experience. If you have a few weeks to pre order you can get what you want or spend the $ upfront and inventory them yourself.

    Keith
  • Dave_4
    Dave_4 Member Posts: 1,405
    And the dope being used?

    And, the intended purpose of the steel pipe?

    Teflon tape? Oil-based paste? Alcohol based paste? Brand name of dope?

    Gas pipe? Steam pipe? Water based heating system?

    What?

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.