Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Need SEER rating and tons for Lennox model H526-036-3P

MAQ Crook
Member Posts: 11
Need SEER rating and tons for Lennox model H526-036-3P along with the year of manufacturing. This house has a heat loss of 130,500 and a Heat gain of : 87,658 .
I think they need a better system or an insulation job or both.
Dennis Crook
I think they need a better system or an insulation job or both.
Dennis Crook
0
Comments
-
3 ton.
And that is an HS26-036-3P. W/O the serial # man. date cannot be determined, but you looking at about 7 yrs old. Lennox has the date code in the serial # if you look at it. The house as described is or does not make sense. If 130,500 heat loss then you would probably need 150M in and that my friend is a 5 ton blower drive. Does this house have windows...:-) Faciously asking.....
Mike T.0
This discussion has been closed.
Categories
- 117.6K All Categories
- 82.8K THE MAIN WALL
- 2.7K A-C, Heat Pumps & Refrigeration
- 43 Biomass
- 403 Carbon Monoxide Awareness
- 8 Chimneys & Flues
- 1.6K Domestic Hot Water
- 4.3K Gas Heating
- 107 Geothermal
- 148 Indoor-Air Quality
- 2.7K Oil Heating
- 45 Pipe Deterioration
- 680 Plumbing
- 4.8K Radiant Heating
- 353 Solar
- 13.3K Strictly Steam
- 2.9K Thermostats and Controls
- 48 Water Quality
- 31 Industry Classes
- 65 Job Opportunities
- 11 Recall Announcements