Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Condensate Hydronic Loop - I'm happy
Keith_24
Member Posts: 5
Hey guys I just wanted to shoot you a photo of something I made for a customer this week. You may recognize it from Dan's great book "How Come?". I totally blew away my mechanic when I told him how it worked, and was pretty happy to be able to mount it on the boiler in like 5 minutes and be done with it. The double tapped bushing is linked to the discharge nozzle through a bunch of 1/2" x 6" nipples w/ couplings.
I decided to make it out of black pipe because I don't have a bench to work off of and besides copper is too easy to go out of square and look all sloppy. The actual loop I ran in Uponor Pex tubing as you can see by the adapters up top. Why Wirsbo? Everything else is terrible, that's why.
Later,
Keith
I decided to make it out of black pipe because I don't have a bench to work off of and besides copper is too easy to go out of square and look all sloppy. The actual loop I ran in Uponor Pex tubing as you can see by the adapters up top. Why Wirsbo? Everything else is terrible, that's why.
Later,
Keith
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements