Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

circulator sizing

Options
Ken_40
Ken_40 Member Posts: 1,310
in THE MAIN WALL
The 003 would work just fine.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=504&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • Dan C.
    Dan C. Member Posts: 248
    circulator sizing

    I'm trying to find out was size circulator to put in. I have a 6500 Btu heat loss. 180 degree water 60 feet total of 1/2" pex for the whole zone and its just one buderus panel rad 48" long 12" high 4" thick. I tried sizing it and it came out to taco 003. I want a 20 deggre delta t
  • Empire_2
    Empire_2 Member Posts: 2,340
    Bill

    Coming up with 1.2 ft/hd @ 1.5GPM for that 60 ft 0f pipping including your base,...Should be great and then some, if you have to add a small off shoot for something else..

    Mike T.
This discussion has been closed.

Categories