Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Which gas Steam Boiler? Burnham, Peerless or Weil-McClain

Options
Al Corelli_2
Al Corelli_2 Member Posts: 395
in THE MAIN WALL
Depending on how the system piping falls around the boiler, I use either the WM EG, or the Burnham. We use many Burnham boilers, and have just done a beautiful Megasteam.
The EG series has those nice big tappings on top. It is the ONLY WM boiler I will use.

Al Corelli
MAV Mechanical Inc.
Mamaroneck, NY
914-804-2234

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=449&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

There was an error rendering this rich post.

Comments

  • Dave_4
    Dave_4 Member Posts: 1,405
    Options
    Which gas Steam Boiler? Burnham, Peerless or Weil-McClain

    I need to install gas fired steam boiler - narrowed the options down to a Burnham Independence, a Peerless 63 or a Weil-McClain EG. The boiler will have a "cheater loop" with circulator to provide baseboard heat to one room.

    Any suggestions on which boiler to buy based on preformance, reliability, ease of maintenance, etc.??

    Thanks!
  • Dave_4
    Dave_4 Member Posts: 1,405
    Options
    I prefer.......

    the Burnham Independence, I use a few of the Power vent steam boilers when the chimney is in question and it sure beats dropping a liner. The Independence also has tappings already in the block for a hot water loop.

    Just my experience... I'm sure W/M and Peerless are fairly comprable.
This discussion has been closed.

Categories