Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Steam radiator parts needed
Phillip Biston
Member Posts: 41
I have an old steam radiator that I took out to sandblast and refinish, in moving the radiator I damaged (putting it mildly) the 1 1/2" thread nipple that screws into the radiator and seats into the valve. The collar nut that screws onto the valve is 2" I would like to know if these parts are still around, nobody here in northeast MO. seems to have any.
Thanks, Phillip
Thanks, Phillip
0
Comments
-
rad valve.
you will probably need to replace the valve and it's union.
Lots of manufacturers make these. Mepco, Watts to name a few.
http://www.mepcollc.com/radvalve.htm#Mepco2
JimThere was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements