Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Check out this wild looking hydro panel

Joe@buderus_2
Joe@buderus_2 Member Posts: 302
in THE MAIN WALL
Nomination for "Pimp my Heating system". As stated in other post, NICE WORK - the paint job is an added touch!

Comments

  • hot_rod
    hot_rod Member Posts: 24,564
    I'm a big fan of flames on ANYTHING

    this was sent to me by a DIYer that watches the wall. Mechanic, carpenter, body shop tech.... a jack of many trades not unlike most of us here.

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • don_52
    don_52 Member Posts: 199
    fan the flames

    HR,

    Cool,thanks for sharing!

    Do you remember the retired fitter that did a Munch
    install in "all stainless".

    db
  • Paul Fredricks_3
    Paul Fredricks_3 Member Posts: 1,556


    Not only is that cool, it's boss.

    It ain't cool if the chrome don't shine.
  • Brad White
    Brad White Member Posts: 2,399
    A DIY-er??

    That is as pro as it gets in my book. Outstanding work.

    This person must have tattoos and good ones too :)
    "If you do not know the answer, say, "I do not know the answer", and you will be correct!"



    -Ernie White, my Dad
  • Weezbo
    Weezbo Member Posts: 6,231
    that has the radiant effect down to a science *~/:)

    excellent workmanship :)
  • ALH_4
    ALH_4 Member Posts: 1,790
    Very Nice

    Even without the paint job, it's nice work.
  • Bill W@Honeywell
    Bill W@Honeywell Member Posts: 164
    Great work!

    Any of you looking for talent, HIRE this guy!
  • Unknown
    Unknown


    That man is an artist! Fantastic!!
  • Wayco Wayne_2
    Wayco Wayne_2 Member Posts: 2,479
    OMG

    That's incredible. Pimp my panel indeed. WW

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • hot_rod
    hot_rod Member Posts: 24,564
    The Munchkin piped with stainless tube

    was indeed the most over the top I have seen. I met the pipefitter a few weeks back. He stopped by my FarmFest booth to say hello. He is from Jefferson City, Missouri. I sent him some Caleffi idronic books. I expect to see so more custom stainless work from him soon.

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Steve Ebels_3
    Steve Ebels_3 Member Posts: 1,291
    Somehow.........

    I knew flames would appeal to you Hot Rod. :)
This discussion has been closed.

Categories