Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
direct vent wall furnace
Big Ed_3
Member Posts: 170
What is wrong with yours ?
0
Comments
-
Pilot assembly for direct vent wall furnace
I have an old Sears & Roebuck Direct Vent Wall Furnace (propane)in my shop and can't find a pilot assembly anywhere online.
The Model No. is 8677365101. It might also read 867.7365101
The MFR No. is SWLC050AA02. Is there a universal pilot Assembly with thermocoupler I can buy or does anyone know where I can purchase the origional equipment parts?
0 -
Assuming you tried Sears...
and knowing that Sears always had equipment made for them, the two largest manufacturers of wall furnaces out there are Cozy and Williams. I would be willing to bet one of them made that unit, or if not one of them will more than likely have a matching pilot assembly.
One thing to keep in mind while your looking is to make sure you get a propane pilot assembly, or a natural gas pilot assembly and a propane orifice, the latter being more likely.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 918 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements