Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
replacing wall mounted steam heaters
Options
Byron Hann
Member Posts: 1
Does anyone have experience in swapping out wall-mounted Turbonix units for steam radiators?
We have a steam boiler that drives about 15 stand alone heating units. Each is plumbed with a steam feed line and a water return line. These units are finicky and increasing rare, and we would like to convert them to wall mounted radiators.
Can this be done one, and if so can it be done one at a time? Would this cause a problem with the steam return line?
We have a steam boiler that drives about 15 stand alone heating units. Each is plumbed with a steam feed line and a water return line. These units are finicky and increasing rare, and we would like to convert them to wall mounted radiators.
Can this be done one, and if so can it be done one at a time? Would this cause a problem with the steam return line?
0
Comments
-
Sure it can
just make sure the wall rads can handle the load. Do a heat-loss calculation on the spaces and go from there.
Check out this link:
www.steamradiators.com
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements