Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Sharkbite & hydronics?

Dave Yates (GrandPAH)_8
Dave Yates (GrandPAH)_8 Member Posts: 62
in THE MAIN WALL
a job yesterday where a contractor used Sharkbite fittings to transition from copper to PEX in a hydronic system. Anyone know if these fittings are rated for 180+F water?

Comments

  • tim smith
    tim smith Member Posts: 2,841
    Looked up specs

    They are certified for 200 degrees @200psi max. for both potable and Hydronic. They are ok for copper, pex etc. They even now offer their own pex w/ barrier? Still not my cup of tea but there you go. Tim
  • Dave Yates (GrandPAH)_8
    Dave Yates (GrandPAH)_8 Member Posts: 62
    Thanx Tim!

    Spent most of yesterday checking out a hydronic system with lots of issues. Paying for my absence today - up to my ears in aligators & trying to catch up on phone calls and estimates!

    We could stand to hire about three mechanics!
This discussion has been closed.

Categories