Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

# 6 Pump pressure adj

Options
John Temporale
John Temporale Member Posts: 5
in THE MAIN WALL
Old # 6 Ray Burner that has a viscosity adjustment control. How do you adjust it? There are 2 set screws on it for adjustment and I do not know what they do. We have a problem keeping the flame signal. Pressure is down on the gauge to 30#. The other boilers run fine at 50#. Not sure how to increase pressure on burner. Do I adjust viscosity control or pump pressure?
This discussion has been closed.

Categories