Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

An open invitation to write a Hot Tech Topic (Dan H.)

hot_rod
hot_rod Member Posts: 23,886
hot rod
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream

Comments

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Like to share your knowledge?

    If there's a subject that you know well and would like to share with the rest of us, please write it up and e-mail it to me and I'll add it under your byline to the Hot Tech Topics section of HeatingHelp.com.

    Previously published articles, and case studies or technical articles from companies are also welcome.

    Thanks.

    mailroom@heatinghelp.com
    Retired and loving it.
  • Noel
    Noel Member Posts: 177
    I'd very much like it if...

    you used this piece that I wrote.

    Fin Tube with Steam

    Noel
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Thanks, Noel!

    Up and running and looking great: Fin-tube radiation for steam heating by Noel Murdough"

    I included a link to your blog. Thanks so much for sharing.
    Retired and loving it.


  • Give me a week or so and I'd like to share a design for an extremely low-load but quite traditional appearing home in a quite brutal climate.

    Forced me to re-think a LOT regarding what I thought I "knew". While currently a highly unusual system, I believe that we'll be encountering similar more and more often in the coming years.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    At your convenience, Mike.

    Sounds like a great read. Thanks!
    Retired and loving it.
  • Bill W@Honeywell
    Bill W@Honeywell Member Posts: 164
    I will edit down my IAQ presentation. but it will take a while.

    Is that OK for you?
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    That would be wonderful!

    Thanks, Bill.
    Retired and loving it.
  • john Cockerill_2
    john Cockerill_2 Member Posts: 33
    Exquisite Heat

    Thank you for the opportunity. This opens the board to others than the regulars who accuse us of spamming all the time. I have sent you info for your program. I hope the openness will continue. It is quite tedious to hang out and not be able to respond without getting accused of spamming. To some spamming is sharing. To others it is competition they do not want. Thanks again.

    www.Exqheat.com
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Up and running

    Btu Delivery System for HVAC System

    Thanks, John.
    Retired and loving it.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Looking forward to seeing that!

    Thanks, HR.
    Retired and loving it.
  • hot_rod
    hot_rod Member Posts: 23,886


    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Thanks to John Barba

    for providing these gems!

    Competing with Utilities

    and

    Home Comfort and How to Sell It

    Anyone else like to join in? Just send it my way and we'll get you published at HeatingHelp.com with a link to your company. Thanks.
    Retired and loving it.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    And thanks to Hot Rod

    for this very helpful article on glycol.

    Again, everyone is welcome to write something and get published here at HeatingHelp.com, along with a link to your company. Thanks.
    Retired and loving it.
  • hot_rod
    hot_rod Member Posts: 23,886
    We need one on instantanous heaters as boilers

    perhaps one of the most frequently asked questions. Perhaps Glenn or someone with experience selling and installing these unit?

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    I'd love to see that.

    Anyone feel qualified to write it?
    Retired and loving it.
  • Don Regan
    Don Regan Member Posts: 43
    EPS Insulation???

    Dan, has anyone ever done an artical on EPS under slab insulation?
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    No, and I'd love to hear from an experienced person on that.

    Anyone up for it?
    Retired and loving it.
  • Richard_6
    Richard_6 Member Posts: 22
    I'll do the EPS...

    It will take me a few days to put it all together for you.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    Thanks from all of us!

    mailroom@heatinghelp.com
    Retired and loving it.
  • Rich Kontny_5
    Rich Kontny_5 Member Posts: 116
    On Demand as Boiler

    Dan,

    Since I have two systems that I have installed as test sites (one in my own home) I would be more than willing to contribute my knowledge and experience of on demand water heaters for both domestic hot water and space heating.

    Rich K.

    Thanks for the invite!
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624

    There was an error rendering this rich post.

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    And here it is:

    Thanks, Alan!

    Vacuum Gauges Paint a Picture for You
    Retired and loving it.
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,610
    And thanks to Bill Wolfe

    for sharing his knowledge of the Basics of Indoor Air Quality with us.
    Retired and loving it.
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624

    There was an error rendering this rich post.

This discussion has been closed.