Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Hey Jim, here's that wall rad . .finally

Jim Bennett
Jim Bennett Member Posts: 607
in THE MAIN WALL
Daniel,

Funny thing is, they were supposed to be adjustable.

Had a little communication snafu with the fabrication shop. They already had 50 done so we got them at a reduced rate and worked with them.

With careful planning they do the job.

Cheers,

Jim

There was an error rendering this rich post.

Comments

  • Daniel_3
    Daniel_3 Member Posts: 543


    Those brackets worked great. The only thing that would have worked better would be the adjustables that A&R co. produced themselves. I doubt I would ever find those . .

    Next time I'm up in Webster I let you know. Take care.
  • ttekushan_3
    ttekushan_3 Member Posts: 962
    Wall radiator brackets

    The whole installation is quite a sight to behold.

    Question: From what parts are these brackets fashioned? I tried a "search" but came up empty. If you could direct me to the thread where this bracket system was discussed that would be wonderful. I have to remount a number of these which were removed many years ago but will have to go back in place. Naturally, the brackets are missing.

    -Terry

    Terry T

    steam; proportioned minitube; trapless; jet pump return; vac vent. New Yorker CGS30C

This discussion has been closed.

Categories