What EDR?

Fred Harwood_2

Am helping a young couple refurbish an old home with single-pipe steam. Found this radiator in two rooms, the only difference being the number of pipes on each. A cast-iron screen sits on top of the pipes. This one has 24 pipes about 30 inches high.

Can anyone provide an EDR?

Many thanks.

Unknown

Fred

I would be tempted to say these were made by Nason, but Steamhead will know for sure.
Here`s some info I got from the library here, its on the resources tab above.
HH Library

Dave

Fred Harwood_2

EDR

Thanks much, Dave. Just what I needed.

DanHolohan

As I've said before,

it pays to wander off the Wall.

Fred Harwood_2

EDR

Dan, without doubt, The Wall is a treasure. My thanks for your considerable effort and foresight in its creation.

Steamhead (in transit)

I'll second the Nason

we have a round one built pretty much the same way. Look carefully at the bottom of the vertical pipes for threads- this would confirm it, I believe Nason was the only one who screwed the pipes into the base.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Fred Harwood_2

EDR

Thanks, Steamhead. I've not seen this type of radiator before, and looking at the photo more closely I see what looks like welds rather than threads at the base of each vertical pipe (see photo). When I get a chance, I'll go look more closely at the radiator itself