Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Looking for Am Std cast iron basboard.

Bob Vennerbeck
Bob Vennerbeck Member Posts: 105
in THE MAIN WALL
Can you post a photo of the sections you are trying to match? I have a pile of sections I inherited that I thought were Baseray, but look slightly different than Burnham's catalog shots. It was pulled from a factory office, I believe, and would probably want a sandblast and repaint.

Vbob

Comments

  • HT in Pa_3
    HT in Pa_3 Member Posts: 24
    American Standard cast iron baseboard

    Having trouble finding the 2' intermediate sections for an American Standard cast iron baseboard that froze last winter. The Am Std bb isn't made anymore, and looks a lot like Burnham's Baseray (9A). Each 2' section has 4 oval- shaped slots at the top, and the push nipples are 6 1/8" c to c. I need two of the intermediate sections. Appreaciate any help. HT
  • HT in Pa_3
    HT in Pa_3 Member Posts: 24


    Bob, I'm not able to give you a "mugshot" now, sorry. Could possibly send one later. Would you first be able to check what you have to see if it matches with the info I gave (the distance between the push nipples, etc.)? I'd apreciate hearing what you find out. I gotta go now, but will check back here Sat. Thank you. HT
This discussion has been closed.

Categories