Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

I'm in Matco H*!!

Options
Tony_23
Tony_23 Member Posts: 1,033
in THE MAIN WALL
I'm prime. Where's this distributor with American made iron fittings ?

Have a boiler going in today and both 1-1/4x1 tees are tapped about 10* off straight. This is on the run !!! An inch and a half out of plumb over 40". :(

Give me some Wards or Grinnells, PLEASE !
This discussion has been closed.

Categories